Pour toute demande de devis ou de réservation,
veuillez contacter notre planning : +33 (0)1 47 60 18 80
Tête Ronford F7 MK4
The Fluid 7 has two sealed fluid units, controlled via 3 basic on/off levers, that may be varied through seven stages, from a soft, free movement to heavy control. Both pan and tilt actions are continuous through 360 º, depending on the length of the lens and camera.
Fluid cushioned free head
Sealed fluid system gives seven degrees of control in both pan and tilt
Smooth accurate braking on pan and tilt
Recessed circular spirit levels
360º scale on pan
150mm or Mitchell base, other fittings can be supplied on request
Double taper roller bearings throughout
Camera screw and platform adjust for vertical and horizontal balance
Second pan bar available
Sealed fluid system gives seven degrees of control in both pan and tilt
Smooth accurate braking on pan and tilt
Recessed circular spirit levels
360º scale on pan
150mm or Mitchell base, other fittings can be supplied on request
Double taper roller bearings throughout
Camera screw and platform adjust for vertical and horizontal balance
Second pan bar available
Bras long MK4
Bras court MK4
Vis papillon
Vis de serrage MK4
Valise métallique
Wide platform + Block pour MK4
Bras court MK4
Vis papillon
Vis de serrage MK4
Valise métallique
Wide platform + Block pour MK4
Adaptateur 300 MK4 + vis papillon
Bras articulé MK4
Plaque allonge Ronford MK4 2 1/2” Riser
Bras articulé MK4
Plaque allonge Ronford MK4 2 1/2” Riser
Rocker plate Ronford/Baker
Base Rocker Plate, pour fixation de caméra, Pan 360°, Tilt +/- 43°, livré avec poignée, pour droitiers ou gauchers
360° panning of the camera on its own axis
Infinitely variable panning friction
Tilt locks allow the camera to be fixed at any position within tilt range
Base with integrated water level for leveling on uneven surfaces Left or right-hand operation possible
Camera fitting – 318” screw
Infinitely variable panning friction
Tilt locks allow the camera to be fixed at any position within tilt range
Base with integrated water level for leveling on uneven surfaces Left or right-hand operation possible
Camera fitting – 318” screw
Quart de brie Ronford/Baker
Plage de pivotement de verrouillage de sécurité 75 ° réglable – dispositif de sécurité intégrée pour empêcher le pliage accidentel – Compatibles aux accesoires ARRI
Branche longue lourde Rondford 120/300
| Product | HEAVY DUTY TRIPOD |
|---|---|
| Head fittings | Mitchell top plate supplied as standard. 150mm bowl can be supplied on request. |
| Materials and Finish | Castings are LM25 anodised, stove enameled black texture. Tubes are 1” dia x 16swg HE30TF alloy, polished and anodized, with nylon wipers and nylon locking pads. Stainless Steel spikes to feet, with rubber covers. Locking levers are anodized and stove enamelled black texture. All steel parts are hardened where necessary, and chrome plated. |
| Height | With legs spread at 1’6” (45.7cm): closed 3ft’ (91.4cm), fully extended 5’6” (167.6cm). |
| Weight | 22lb (10kg). |
| Spreader | An infinitely adjustable spreader with a strong elastic clip-down device, which is secured in seconds. Made from high tensile anodized aluminium with large diameter locking hand-wheels to adjust length of spread; steel parts hardened and heavily chromium plated. Dimensions (center to foot) minimum 1’5” (43cm), maximum 2’1” (64cm). Weight 4lb 7oz (2kg). |
| Baby Tripod | As above, but height range from 1’8” (50.8cm) to 3’ (91.4cm) Weight 18lb (8kg). |
| Transit Cases Specification | Moulded black grain AVS. Dimensions 42” x 12” x 11” (105cm x 30cm x 27.5cm) standard. 26” x 12” x 11” (65cm x 30cm x 27.5cm) baby. Weight 11lb (5kg) standard, 8lb (3.5kg) baby. |
Branche medium lourde Rondford 120/300
| Product | MEDIUM DUTY TRIPOD |
|---|---|
| Head fittings | 150cm bowl supplied as standard. Mitchell plate or 100cm bowl supplied to order. |
| Materials and Finish | Castings are LM25 anodised, stove enamelled black texture. Tubes are ¾” dia x 16swg HE30TF alloy, polished and anodised, with nylon wipers and nylon locking pads. Stainless Steel spikes to feet, with rubber covers. Locking levers are anodised and stove enamelled black texture. All steel parts are hardened where necessary, and chrome plated. |
| Height | With legs spread at 1’6” (45.7cm): closed 3ft’ (91.4cm), fully extended 5’6” (167.6cm). |
| Weight | 14lb (6.5kg). |
| Spreader | An infinitely adjustable spreader, integral tripod, with a strong elastic clip-down device, which is secured in seconds. Made from high tensile anodised aluminium with large diameter locking hand-wheels to adjust length of spread; steel parts hardened and heavily chromium plated. Dimensions (centre to foot) minimum 1’5” (43cm), maximum 2’1” (64cm). Weight 4lb 7oz (2kg). |
| Baby Tripod | As above, but height range from 1’8” (50.8cm) to 3’ (91.4cm) Weight 11lb (5kg). |
| Transit Cases Specification | Moulded black grain AVS. Dimensions 42” x 12” x 11” (105cm x 30cm x 27.5cm) standard. 26” x 12” x 11” (65cm x 30cm x 27.5cm) baby. Weight 11lb (5kg) standard, 6lb (2.7kg) baby. |
